|
Rival - R
The RIVAL - R is an outstanding
all-round model with superb handling characteristics and a wide
speed range, making it the ideal choice for the slope, flat field
or as an Electric glider. The MH 32 wing section combined with
the full span camber changing capability of the flaps ensures
the model has an extremely wide speed range and ensure the model
has an excellent thermal soaring capability. The Crow brakes
allow safe descents out of the thermals and accurate and easy
landings.The three-piece Built-up wings have the GRP wing joiners
fitted, the Flaps and Ailerons are pre-cut and hinged, the servo
cable ducts and servo wells are installed. The built-up tailplane
has a symmetrical profile and a carbon spar, the mounting holes
are drilled and the elevator is hinged. The wings, tailplane
and rudder are covered in Oracover. The White Epoxy GRP Tee Tail
fuselage has a trimmed GRP Canopy, the motor mounting plate and
sternpost are fitted. The fuselage is designed to allow the elevator
servo to be mounted in the base of the fin. The rudder can be
connected to the servo with the ready fitted bowden or alternatively
the servo can be mounted in the base of the fin and directly
linked to the rudder. An ideal Electric drive combination would
be a Kontronik 480/28 with 5.2:1 gearbox and 8 x Cp 1700 cells,
for a typical flying weight of 2200g.For the purist, the glider
version will provide outstanding flying from the slope or the
flat field.
Available
with either Glider or Electric fuselages.
Homepage: www.fvk.de
Technical
questions should be addressed to:-
Brian Anderson Tel: **44 191 3887649
e-mail: Technical
questions
|
